Handi-Grip (Mobeli) Grab Bars by Clarke Health Care

Handi-Grip portable grab bars for assistance anywhere in your home or while traveling. The strong suction adheres to most smooth surfaces. Because the Hand-Grip portable grab bars are not screwed into the surface, they are perfect for renters, traveling or visiting. You can easily attach a Handi-Grip portable grab bar to marble, glass or tile, surfaces that may be damaged by drilling holes.

Click here for the Mobeli® Handi-Grip Brochure!

Click here for the Specifications on the various grab bars!

New for 2010 is a safety indicator. When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, then release and reattach the suction pad. The rocker can be both seen and felt for the site impaired. Most Mobeli bars are available with the safety indicator.

Handi-grip portable grab bar consists of two suction cups with release levers and a grab bar. The suction housing and bar are high tensile plastic components, suction pads are natural rubber and all metal parts are stainless steel. Parts are easily disassembled, lightweight and take little space for travelers.

Due to the vacuum suction generated by the discs, the grab bar can only be attached to smooth and non-porous surfaces, which are pore- and steam-tight, dry and free of oils and grease. On rough or porous surfaces, the vacuum hold diminishes or does not exist at all. All tiles are not necessarily smooth and steam-tight, test your surface first. Using the grab bar under water or in extreme temperatures (such as a sauna) reduces the suction power. The minimum area for each suction cup for adhesion is 5”x’5”. The use of Handi-Grip portable grab bar is not recommended on dry wall.

New! 

Stainless steel plates, set 2, provides the 5” x 5” flat surface needed for suction grab bars. Use areas with small tiles, grout lines, or porous surface. Adhesive backing.